C2G 40973 3x5 Component Video_Digital Audio Matrix Switch w_RS-232 - Manual (Page 4)

2
Features:
• Five Component Video / TOSLINK Outputs
High quality audio and video output to as many as five A/V devices such as TV displays,
A/V receivers or other A/V devices
• Component Video Inputs
High quality video support for up to three standard or high-definition sources
• TOSLINK Inputs
Digital multi-channel support for up to three audio sources
• Standard Stereo RCA Connectors
Left/right stereo audio support for two-speaker systems
• Push-Button
Source Selection
Front panel buttons with tri-color LED for quick input/output identification.
• Slim Line Remote Control
Operates the switch from a distance or program commands into your existing remote
control system
• RS-232 Control
PC Interface for optional use with an automated remote control system
Connecting Devices:
For optimal performance, use high-quality audio and video cables. Use a component video
cable with RCA plugs (not supplied) for all component video connections. Use audio cables with
TOSLINK or RCA plugs (not included) for all audio connections.
The switch’s color-coded jacks make it simple to connect devices to the switch. Green – blue
– red jacks (marked as Y, Pb and Pr) are used for component video, red jacks are for right
channel audio and white jacks for left channel audio.
Before connecting the switch to your digital audio equipment, make sure you perform the
following tasks:
•
Power down all components that will be connected to this switch
z
Remove the plastic plug that protects the switch’s TOSLINK jack from dust. Keep plastic
plug for future use.
z
Remove the cable end protectors from the TOSLINK connector on your TOSLINK cable (not
supplied).