C2G 40973 3x5 Component Video_Digital Audio Matrix Switch w_RS-232 - Manual (Page 5)

3
Follow these steps to connect the components to the switch.
1. Connect each of the component video outputs from your devices (DVD player, HD
cable/satellite receiver, video game player, etc.) to a set of Inputs 1-3 (Y, Pb and Pr jacks)
on the back or front of the switch.
2.
Connect your devices’ TOSLINK outputs to a TOSLINK Input (1-3) jacks on the back or on
front of the switch. If a device does not have a TOSLINK output, connect its stereo L/R
audio outputs to a set of stereo L/R audio Inputs (1-2) jacks on the back of the switch.
Front panel Input 3 features 3.5mm jack for stereo L/R connections. A 3.5mm to RCA “Y”
adapter (not included) must be used for this connection.
Note: This device does not convert TOSLINK to analog audio or analog audio to
TOSLINK. Audio switching follows video.
3. Connect component video Outputs (1-5) Y, Pb and Pr of the matrix switch to the
component video inputs of up to five TVs/monitors.
4.
Using a TOSLINK cable, connect the ends from the TOSLINK Outputs (1-5) on the switch
to the TOSLINK inputs on up to five A/V receivers (or digital audio recorders). If devices
do not have TOSLINK inputs, use RCA audio cables to connect from the matrix switch’s
L/R audio Output (1-5) to RCA L/R audio inputs on five displays or A/V receivers.
Example diagram:
Rear Panel
Front Input