Diodes SBR0560S1 - Manual

SBR0560S1
Document number: DS31525 Rev. 2 - 2
1 of 4
www.diodes.com
June 2009
© Diodes Incorporated
SBR0560S1
NEW PROD
UC
T
SBR is a registered trademark of Diodes Incorporated.
0.5A SBR
®
SUPER BARRIER RECTIFIER
Features
• Low Forward Voltage Drop
• Low Reverse Leakage
•
Excellent High Temperature Stability
•
Patented Super Barrier Rectifier Technology
• Soft, fast switching capability
• 150ºC Operating Junction Temperature
•
Lead, Halogen and Antimony Free, RoHS Compliant
•
“Green” Device (Note 1)
Mechanical Data
• Case: SOD-123
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
•
Leads: Solderable per MIL-STD-202, Method 208
•
Lead Free Plating (Matte Tin Finish annealed over Alloy 42
leadframe)
•
Polarity: Cathode Band
•
Marking Information: See Page 3
• Ordering Information: See Page 3
•
Weight: 0.004 grams (approximate)
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V
RRM
V
RWM
V
RM
60 V
Average Rectified Output Current I
O
500 mA
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
I FSM
15 A
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
R θJA
R θJA
305
271 ºC/W
Operating and Storage Temperature Range T
J
, T
STG
-65 to +150 ºC
Electrical Characteristics
@T A = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage (Per Diode) V
F
-
-
0.44
-
0.44
0.50
0.46
V
I
F
= 0.25A, T
J
= 25ºC
I
F
= 0.5A, T
J
= 25ºC
I
F
= 0.5A, T
J
= 125ºC
Leakage Current (Note 4) I
R
-
-
- 100
25
µA
mA
V
R
= 60V, T
J
= 25ºC
V
R
= 60V, T
J
= 125ºC
Notes: 1. No purposefully added lead. Halogen and Antimony Free.
2. Part mounted on FR-4 board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
3. Part mounted on Polymide board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
Top View
Please click here to visit our online spice models database.