Diodes SBR1U150SA - Manual (Page 2)

SBR is a registered trademark of Diodes Incorporated.
SBR1U150SA
Document number: DS31341 Rev. 7 - 2
2 of 5
www.diodes.com
September 2012
© Diodes Incorporated
SBR1U150SA
Maximum Ratings
(@T A = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V
RRM
V
RWM
V
RM
150 V
RMS Reverse Voltage V
R(RMS)
106 V
Average Rectified Output Current (See Figure 1) I
O
1.0 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
FSM
42 A
Repetitive Peak Avalanche Power (1
μS, +25°C)
P
ARM
6,000 W
Thermal Characteristics
Characteristic Symbol Value Unit
Thermal Resistance Junction to Soldering (Note 6) R θJS 3
°C/W Thermal Resistance Junction to Ambient (Note 7) R θJA 119
Thermal Resistance Junction to Ambient (Note 8) R θJA 88
Operating and Storage Temperature Range T
J
, T
STG
-65 to +150 °C
Electrical Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 9) V (BR)R
150 - - V I R = 100µA
Forward Voltage Drop V F
- - 0.70
V
I
F
= 1.0A, T
J
= +25ºC
- - 0.56 I
F
= 1.0A, T
J
= +125ºC
Leakage Current (Note 9) I
R
- - 0.1 mA V
R
= 150V, T
J
= +25ºC
- - 10 mA V
R
= 150V, T
J
= +125ºC
Notes: 6. Theoretical R θJS calculated from the top center of the die straight down to the PCB cathode tab solder junction.
7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. T
A
= 25ºC
8. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com
9. Short duration pulse test used to minimize self-heating effect.