Diodes SBR60A200CT - Manual

SBR60A200CT
Document number: DS31243 Rev. 4 - 2
1 of 3
www.diodes.com
December 2009
© Diodes Incorporated
SBR60A200CT
SBR is a registered trademark of Diodes Incorporated.
60A SBR
®
SUPER BARRIER RECTIFIER
Features
• Low Forward Voltage Drop
• Low Leakage Current
•
Excellent High Temperature Stability
•
Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 175ºC Operating Junction Temperature
•
Lead Free Finish, RoHS Compliant (Note 2)
•
Also Available in Green Molding Compound (Note 5)
Mechanical Data
• Case: TO-220AB
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Terminals: Matte Tin Finish annealed over Copper Lead Frame.
Solderable per MIL-STD-202, Method 208
• Polarity: As Marked on Body
• Ordering Information: See Page 2
•
Marking Information: See Page 2
•
Weight: 1.85 grams (approximate)
Maximum Ratings (Per Leg)
@T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V RRM
V RWM
V
RM
200 V
Average Rectified Output Current Per Device (Per Leg)
(Total)
I
O
30
60
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
FSM
250 A
Thermal Characteristics (Per Leg)
Characteristic Symbol Value Unit
Typical Thermal Resistance
Thermal Resistance, Junction to Case (Note 3)
Thermal Resistance, Junction to Ambient (Note 3)
R θJC
R
BB
θJA
1.2
8.4 ºC/W
Operating and Storage Temperature Range T
J
, T
STG
-65 to +175 ºC
Electrical Characteristics (Per Leg)
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop V
F
-
0.91
0.74 0.96
0.77
V
I
F
= 30A, T
J
= 25ºC
I
F
= 30A, T
J
= 125ºC
Leakage Current (Note 1) I
R
-
10
2
100
20
μA
mA
V
R
= 200V, T
J
= 25ºC
V
R
= 200V, T
J
= 125ºC
Reverse Recovery Time t
rr
- 38 50
ns
I
F
= 0.5A, I
R
= 1A, I
RR
= 0.25A
- 25 35
I F = 1A, V R = 30V
di/dt = 100A/
μs, T
J
= 25ºC
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
3. Device mounted on heatsink (Black Aluminum, 50mm x 37mm x 15mm)
TO-220AB
Top View
Package Pin Out
Configuration
TO-220AB
Bottom View
Please click here to visit our online spice models database.