Diodes PR1501/S - PR1505/S - Manual

DS26011 Rev. 4 - 2 1 of 3 PR1501/S - PR1505/S
www.diodes.com
ã
Diodes Incorporated
PR1501/S - PR1505/S
1.5A FAST RECOVERY RECTIFIER
Features
“S” Suffix Designates DO-41 Package
No Suffix Designates DO-15 Package
Dim
DO-41 Plastic DO-15
Min Max Min Max
A 25.40 ¾ 25.40 ¾
B 4.06 5.21 5.50 7.62
C 0.71 0.864 0.686 0.889
D 2.00 2.72 2.60 3.60
All Dimensions in mm
A A B
C
D
Maximum Ratings and Electrical Characteristics @ T
A
= 25 °C unless otherwise specified
·
Diffused Junction
·
Fast Switching for High Efficiency
·
High Current Capability and Low Forward Voltage Drop
·
Surge Overload Rating to 50A Peak
·
Low Reverse Leakage Current
·
Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
·
Case: DO-41, DO-15
·
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·
Moisture Sensitivity: Level 1 per J-STD-020C
·
Terminals: Finish - Bright Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
·
Polarity: Cathode Band
·
Ordering Information: See Last Page
·
Marking: Type Number
·
DO-41 Weight: 0.3 grams (approximate)
·
DO-15 Weight: 0.4 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol
PR
1501/S
PR
1502/S
PR
1503/S
PR
1504/S
PR
1505/S
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V
RRM
V
RWM
V
R
50 100 200 400 600 V
RMS Reverse Voltage V
R(RMS) 35 70 140 280 420 V
Average Rectified Output Current
(Note 1)
@ T
A
= 50 °C
I
O 1.5 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
(JEDEC Method)
I FSM 50 A
Forward Voltage @ I
F
= 1.5A V FM 1.2 V
Peak Reverse Current @ T A = 25 °C
at Rated DC Blocking Voltage @ T
A
= 100 °C
I
RM
5.0
100
mA
Reverse Recovery Time (Note 3) t
rr 150 250 ns
Typical Junction Capacitance (Note 2) C
j 20 10 pF
Typical Thermal Resistance Junction to Ambient R qJA 35 K/W
Operating and Storage Temperature Range T
j,
T
STG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with I F = 0.5A, I R = 1.0A, I rr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
NOT RECOMMENDED FOR NEW DESIGN