Diodes SF20AG - SF20JG - Manual

e 3
DS24013 Rev. 3 - 2 1 of 3 SF20AG - SF20JG
www.diodes.com ã Diodes Incorporated
SF20AG - SF20JG
2.0A SUPER-FAST GLASS PASSIVATED RECTIFIER
Features
A A B
C
D
DO-15
Dim Min Max
A 25.40 ¾
B 5.50 7.62
C 0.686 0.889
D 2.60 3.6
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ T
A
= 25 ° C unless otherwise specified
· Glass Passivated Die Construction
· Super-Fast Switching for High Efficiency
· Surge Overload Rating to 60A Peak
· Low Reverse Leakage Current
· Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
· Case: DO-15
· Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish – Tin. Solderable per MIL-STD-202,
Method 208
· Polarity: Cathode Band
· Marking: Type Number
· Ordering Information: See Page 3
· Weight: 0.35 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol SF20
AG
SF20
BG
SF20
CG
SF20
DG
SF20
FG
SF20
GG
SF20
HG
SF20
JG
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
V RRM
V
RWM
V
R
50 100 150 200 300 400 500 600 V
RMS Reverse Voltage V
R(RMS) 35 70 105 140 210 280 350 420 V
Average Rectified Output Current @ T
A
= 75 ° C
(Note 1)
I
O 2.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
I
FSM 60 A
Forward Voltage @ I
F
= 2.0A V
FM 0.95 1.3 1.5 V
Peak Reverse Current @ T
A
= 25 ° C
at Rated DC Blocking Voltage (Note 5) @ T
A
= 100 ° C
I
RM
10
100
m A
Reverse Recovery Time (Note 2) t
rr 35 40 50 ns
Typical Total Capacitance (Note 3) C
T 75 50 pF
Typical Thermal Resistance Junction to Ambient R
q JA 40 °C/W
Operating and Storage Temperature Range T
j,
T
STG -65 to +150 ° C
Notes: 1. Valid provided that leads are kept at ambient temperature at a distance of 9.5mm from the case.
2. Measured with I F = 0.5A, I R = 1.0A, I rr = 0.25A. See Figure 5.
3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect.