Diodes SD05 - Manual

SD05
Document number: DS31594 Rev. 6 - 2
1 of 4
www.diodes.com
November 2013
© Diodes Incorporated
SD05
UNI-DIRECTIONAL SURFACE MOUNT TVS
Features
 350 Watts Peak Pulse Power (tp = 8x20μs)
 IEC 61000-4-2 (ESD): Air – 15kV, Contact – 8kV
 IEC 61000-4-2 (ESD), HBM – 16kV
 IEC61000-4-4 (EFT): Level 4, 40A
 IEC61000-4-5 (Lightning): 24A
 Unidirectional Configuration
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
 Case: SOD323
 Case Material: Molded Plastic, “Green” Molding Compound,
Note 3. UL Flammability Classification Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Matte Tin Finish annealed over Alloy 42 leadframe
(Lead Free Plating) Solderable per MIL-STD-202, Method 208
 Polarity: Cathode Band
 Weight: 0.005 grams (approximate)
Ordering Information
(Note 4)
Part Number Case Packaging
SD05-7 SOD323 3000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html
Marking Information
Thermal Characteristics
Characteristic Symbol Value Unit
Peak Pulse Power (tp = 8x20μs) (Note 5) T
A
= +25°C P
pk
350 W
Thermal Resistance, Junction to Ambient (Note 5) T
A
= +25°C R
θJA
625 C/W
Operating and Storage Temperature Range T
J
, T
STG
-55 to +150 C
Electrical Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Reverse
Standoff
Voltage
Breakdown
Voltage
V
BR
@ I
T
Test
Current
Max. Reverse
Leakage @ V
RWM
(Note 6)
Max. Clamping
Voltage @ I
PP
= 5A
(Note 7)
Max. Clamping Voltage
V
C
@ I
PP
(Note 7)
Total Max
Capacitance C
T
V
R
= 0V
f = 1MHz
V
RWM
(V) Min (V) Max (V) I
T
(mA) I
R
(μA) V
C
(V) V
C
(V) I
PP
(A) (pF)
5 6.2 7.3 1.0 10 9.8 14.5 24 350
Notes: 5. Device mounted on FR-4 PC board with suggested pad layout, which can be found on our website at http://www.diodes.com Measured across pin 1 and
pin 2.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20μs peak pulse current (I
pp
) waveform.
Top View Device Schematic
1 2
1 = Cathode
2 = Anode
ZA = Product type marking code ZA
SOD323