Diodes TL072 - Manual

TL072
LOW NOISE JFET INPUT OPERATIONAL
AMPLIFIERS
TL072 Rev. 1 1 of 11 MAY 2009
www.diodes.com © Diodes Incorporated
• Low
Power Consumption
• Wide Common-Mode and Differential Voltage Ranges
• Low Input Bias and Offset Currents
• Output
Short-Circuit Protection
• Low Total Harmonic Distortion…0.003% Typ
•
Low Noise Vn= ΗΖ 18nV Typ at f=1kHz
•
High Input Impedance…JFET-Input Stage
• Internal Frequency Compensation
• Latch-Up-Free Operation
• High Slew Rate…13V/ μs Typ
•
Common-Mode Input Voltage Range Includes V
CC
+
• SOP-8L: Available in “Green” Molding Compound
(No Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
The JFET-input operational amplifiers in the TL072 are similar to
the TL082, with low input bias and offset currents and fast slew
rate. The low harmonic distortion and low noise make the TL072
ideally suited for high-fidelity and audio preamplifier applications.
Each amplifier features JFET inputs (for high input impedance)
coupled with bipolar output stages integrated on a single
monolithic chip.
• Active filters
• Audio pre-amps
TL 072 S G - 13
Package Packing
S : SOP-8L
Green
13 : Tape & Reel G : Green
Device
Package
Code
Packaging
(Note 2)
13” Tape and Reel
Quantity Part Number Suffix
TL072SG-13 S SOP-8L 2500/Tape & Reel -13
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Features General Description
Applications
Ordering Information
Please click here to visit our online spice models database.