Diodes DDA (xxxx) U - Manual

DDA(xxxx)U
Document number: DS30346 Rev. 11 - 2
1 of 7
www.diodes.com
November 2013
© Diodes Incorporated
DDA(xxxx)U
PNP PRE-BIASED SMALL SIGNAL DUAL SURFACE MOUNT TRANSISTOR
Features
 Epitaxial Planar Die Construction
 Complementary NPN Types Available (DDC)
 Built-In Biasing Resistors
 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
 Halogen and Antimony Free "Green" Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
 PPAP Capable (Note 4)
Part Number R1 (NOM) R2 (NOM)
DDA124EU 22KΩ 22KΩ
DDA144EU 47KΩ 47KΩ
DDA114YU 10KΩ 47KΩ
DDA123JU 2.2KΩ 47KΩ
DDA114EU 10KΩ 10KΩ
Mechanical Data
 Case: SOT363
 Case Material: Molded Plastic, “Green” Molding Compound
 UL Flammability Classification Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Finish – Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
 Weight: 0.006 grams (approximate)
Part Number R1 Only
DDA113TU 1KΩ
DDA143TU 4.7KΩ
DDA114TU 10KΩ
Ordering Information
(Notes 4 & 5)
Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel
DDA124EU-7-F AEC-Q101 P17 7 8 3,000
DDA124EUQ-7-F Automotive P17 7 8 3,000
DDA124EUQ-13-F Automotive P17 13 8 10,000
DDA144EU-7-F AEC-Q101 P20 7 8 3,000
DDA144EUQ-7-F Automotive P20 7 8 3,000
DDA114YU-7-F AEC-Q101 P14 7 8 3,000
DDA114YUQ-7-F Automotive P14 7 8 3,000
DDA123JU-7-F AEC-Q101 P06 7 8 3,000
DDA114EU-7-F AEC-Q101 P13 7 8 3,000
DDA114EUQ-7-F Automotive P13 7 8 3,000
DDA113TU-7-F AEC-Q101 P01 7 8 3,000
DDA143TU-7-F AEC-Q101 P07 7 8 3,000
DDA143TUQ-7-F Automotive P07 7 8 3,000
DDA143TUQ-13-F Automotive P07 13 8 10,000
DDA114TU-7-F AEC-Q101 P12 7 8 3,000
DDA114TUQ-7-F Automotive P12 7 8 3,000
DDA114TUQ-13-F Automotive P12 13 8 10,000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the
same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
R1, R2 R1 Only
R
1
R
1
R
2
6 5 4
1 2 3
R
2
R
1
6 5 4
3 2 1
R
1
Top View
SOT363
Device Schematic