Diodes D1213A-02SO - Manual (Page 2)

D1213A-02SO
Document number: DS35830 Rev. 3 - 2
2 of 5
www.diodes.com
November 2012
© Diodes Incorporated
D1213A-02SO
NEW PROD
UC
T
NEW PROD
UC
T
Maximum Ratings
(@T A = +25°C, unless otherwise specified)
Characteristic Symbol Value Unit Conditions
Operating Supply Voltage V
P
- V
N
6.0 V —
DC Voltage at any Channel Input - (V
N
– 0.5) to (V
P
+ 0.5) V —
Peak Pulse Current I
PP
5 A 8/20µs, Per Figure 3
ESD Protection – Contact Discharge V
ESD_Contact
±8 kV Standard IEC 61000-4-2
ESD Protection – Air Discharge V
ESD_Air
±15 kV Standard IEC 61000-4-2
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 5) P D
400 mW
Thermal Resistance, Junction to Ambient (Note 5) R θJA 310 °C/W
Operating and Storage Temperature Range T
J
, T
STG
-65 to +150 °C
Electrical Characteristics
(@T
A
= +25°C, unless otherwise specified)
Characteristic Symbol Min Typ Max Unit Test Conditions
Operating Supply Voltage V
P
— 3.3 5.5 V —
Operating Supply Current (Note 6) I
P
— — 8.0 µA (V
P
– V
N
) = 3.3V
Channel Leakage Current (Note 6) I
R
— ±0.1 ±1.0 µA V
P
= 5V, V
N
= 0V
Reverse breakdown voltage V
BR
6.0 — — V I
R
= 1mA
Clamping Voltage, Positive Transients V CL1
— 10.0 — V I PP = 1A, t p = 8/20 μs
Clamping Voltage, Negative Transients V
CL2
— -1.7 — V I
PP
= -1A, t
p
= 8/20 μs
Forward Voltage for Top Diode V
FD1
0.60 0.80 0.95 V I
F
= 8mA, CH1 to V
P
or CH2 to V
P
Forward Voltage for Bottom Diode V FD2
0.60 0.80 0.95 V I F = 8mA, V N to CH1 or V N to CH2
Dynamic Resistance R
DYN
— 0.9 — Ω I
PP
= 1A, t
p
= 8/20 μs
Channel Input Capacitance C
T
— 0.85 1.2 pF
V
IN
= 1.65V, V
P
= 3.3V,
V
N
= 0V, f = 1MHz
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Measured from CH1 to V
N or CH2 to V N .
8. Measured from V P to V N .
9. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.