Diodes AP3583/A - Manual (Page 4)

Data Sheet
Single Phase Synchronous Buck PWM Controller With Reference Input AP3583/A
Dec. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited
4
Absolute Maximum Ratings (Note 1)
Parameter Symbol Value Unit
Supply Voltage V
CC
-0.3 to 15 V
BOOT Voltage V
BOOT
-0.3 to V
PHASE
+15 V
Voltage from UGATE to PHASE V
UGATE
-0.3 to 15 V
Voltage from PHASE, LGATE Pin to GND
V
PHASE
,
V
LGATE
-1 to 15 V
Voltage on Other Separate Pin -0.3 to 6 V
Thermal Resistance θ
JA
50 ºC/W
Operating Junction Temperature T
J
-40 to 125 ºC
Storage Temperature T
STG
-65 to 150 ºC
Lead Temperature (Soldering, 10 sec) T
LEAD
260 ºC
ESD (Human Body Model) (Note 2) 2000 V
ESD (Machine Model) (Note 2) 200 V
Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only, and functional operation of the device at these or any other conditions
beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute
Maximum Ratings” for extended periods may affect device reliability.
Note 2: Devices are ESD sensitive. Handling precaution recommended.
Recommended Operating Conditions
Parameter Symbol Min Max Unit
Supply Input Voltage V
CC
4.5 13.2 V
Operating Junction Temperature T
J
-40 125 °C
Operating Ambient Temperature T
A
-40 85 °C