Diodes AP1501A User Manual

Ap1501a, Typical application circuit, Features

Advertising
background image

AP1501A

150KHz, 5A PWM BUCK DC/DC CONVERTER

AP1501A Rev. 10

1 of 14

SEPTEMBER 2009

DS31191

www.diodes.com

©

Diodes Incorporated

Output voltage: 3.3V, 5V, 12V and adjustable output
version

Adjustable version output voltage range, 1.23V to
37V+4%

• 150Khz

+15% fixed switching frequency

Voltage mode non-synchronous PWM control

• Thermal-shutdown

and

current-limit

protection

ON/OFF shutdown control input

Operating voltage can be up to 40V

Output load current: 5A

Low power standby mode

Built-in switching transistor on chip

Lead Free packages: TO263-5L and TO220-5L(R)

TO263-5L and TO220-5L(R): Available in “Green”
Molding Compound (No Br, Sb)

Lead Free Finish/ RoHS Compliant (Note 1)




The AP1501A series are monolithic ICs that are designed for a

step-down DC/DC converter, and possess the ability to drive a
5A load without additional transistor component. Due to reducing
the number of external component, the board space can be
saved easily. The external shutdown function can be controlled
by logic level and then come into standby mode. The internal
compensation makes feedback control have good line and load
regulation without external design. Regarding protected function,
thermal shutdown is to prevent over temperature operating from
damage, and current limit is against over current operating of the
output switch. The AP1501A series operates at a switching
frequency of 150Khz thus allowing smaller sized filter
components than what would be needed with lower frequency
switching regulators. Other features include a guaranteed
+4% tolerance on output voltage under specified input voltage
and output load conditions, and +15% on the oscillator frequency.
The output version includes fixed 3.3V, 5V, 12V, and an
adjustable type. The packages are available in a standard 5-lead
TO263 and TO220 packages.


Simple High-efficiency step-down regulator

On-card switching regulators

Positive to negative converter


Typical Application Circuit



(1) Fixed Type Circuit

1

2

3

5

4

12V

DC Input

Cin

Capacitor

FB

SD

D1

Schottky

Diode

Vin

Gnd

Output

AP1501A

-33

Co

Capacitor

Inductor

L1

18uH

3.3V/5A

Output Load

Features

General Description

Applications

Advertising