Diodes AP3615 - Manual (Page 4)

Data Sheet
5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3615
Jan. 2013 Rev. 1. 3 BCD Semiconductor Manufacturing Limited
4
Absolute Maximum Ratings (Note 1)
Parameter Symbol Value Unit
Input Voltage V
IN
-0.3 to 6 V
VOUT Pin Voltage (VOUT1 & VOUT2) V
OUT
-6 to 0.3 V
EN Pin Voltage V
EN
-0.3 to 6 V
C1+, C2+ Pin Voltage V
C+
-0.3 to 6 V
C1-, C2- Pin Voltage V
C-
-6 to 0.3 V
D1, D2, D3, D4 and D5 Pin Voltage V
D
V
OUT
to V
IN
V
Thermal Resistance
(Junction to Ambient, No Heat Sink, Free Air)
θ
JA
60 ºC/W
Operating Junction Temperature T
J
150 ºC
Storage Temperature T
STG
-65 to 150 ºC
Lead Temperature (Soldering, 10sec) T
LEAD
260 ºC
Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only, and functional operation of the device at these or any other conditions
beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute
Maximum Ratings” for extended periods may affect device reliability.
Recommended Operating Conditions
Parameter Symbol Min Max Unit
Input Voltage V
IN
2.8 5.5 V
Operating Ambient Temperature T
A
-40 85 ºC