Diodes AH373 User Manual

Ah373, Description, Features

Advertising
background image

AH373

Document number: Draft DS31173 Rev. 11 - 2

1 of 12

www.diodes.com

September 2013

© Diodes Incorporated

AH373

INTERNAL PULL-UP HALL EFFECT LATCH

Description

AH373 is a single-digital-output Hall-Effect latch sensor with internal
pull-up resistor for high temperature operation. The device includes
an on-chip Hall voltage generator for magnetic sensing, an amplifier
to amplify Hall voltage, and a comparator to provide switching
hysteresis for noise rejection, and an output driver with a pull-up
resistor. An internal band-gap regulator provides a temperature
compensated supply voltage for internal circuits and allows a wide
operating supply range.

When the magnetic flux density (B) perpendicular to the package is
larger than operate point (Bop), output is switched on (OUT pin is
pulled low). The output state is held on until a magnetic flux density
reversal falls below Brp. When B is less than Brp, the output is
switched off.

The AH373 is available in SIP-3L, SC59 and SOT23 packages.

Features

Bipolar Hall Effect Latch Operation

2.2V to 20V Operating Range

Single Output with Built-in Pull-up Resistor

25mA output Sink Capability

 -40C to +125°C Operating Temperature

Industry Standard SIP-3L, SC59 and SOT23 Packages

Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)

Pin Assignments

(TOP View)

SC59 and SOT23


(TOP View)

1. V

DD

2. GND

3. OUT

SIP-3L


Applications

Rotor Position Sensing for Motor Commutation

 Encoder

Speed Measurement – RPM Monitor

Contact-less Current Switch




Notes:

1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"

and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.


Typical Application Circuits

M

Driver

&

Control Logic

I

a

I

b

I

c

I

A

I

C

I

B

H

B

H

A

H

C

M: Three Phase Hall Motor

Digital Hall Effect Sensor

Hall Motor Driver

RPM sensing

3 Phase Hall Motor


Advertising