Diodes AH1892 - Manual (Page 6)

AH1892
PROGRAMMABLE MICROPOWER OMNIPOLAR
HALL-EFFECT SENSOR SWITCH
AH1892
Document number: DS35092 Rev. 1 - 2
6 of 11
www.diodes.com
May 2012
© Diodes Incorporated
NEW PROD
UC
T
Application Note (cont.)
Bands Select Change Timing and Valid Output
Whenever band selection BSEL pin input is changed, allow for band selection changeover to complete and stabilize. The output is valid only
after the second complete operating ‘awake’ phase. Time taken for the output to be valid, after the BSEL change, depends on timing of
BSEL change during the sleep and awake phase; this time can range from 100ms typical and 200.1ms maximum.