Diodes 74AHC14 - Manual

74AHC14
Document number: DS35342 Rev 3 - 2
1 of 8
www.diodes.com
January 2013
© Diodes Incorporated
NEW PROD
UC
T
74AHC14
HEX INVERTERS WITH SCHMITT TRIGGER INPUTS
Description
The 74AHC14 provides provides six independent Schmitt trigger input
inverters with standard push-pull outputs. The device is designed for
operation with a power supply range of 2.0V to 5.5V. The inputs are
tolerant to 5.5V allowing this device to be used in a mixed voltage
environment.
The gates perform the Boolean function:
A Y =
Features
• Wide Supply Voltage Range from 2.0V to 5.5 V
• Outputs Sink or Source 8mA at V
CC
= 4.5V
• CMOS Low Power Consumption
• Schmitt Trigger Action at All Inputs
• Typical hysteresis of 1V allows for transformation of slow
changing input signals to sharply defined, fast transition output
signals.
• Inputs can be driven by 3.3V or 5.5V allowing for voltage
translation applications.
• ESD Protection Exceeds JESD 22
ƒ 200-V Machine Model (A115-A)
ƒ 2000-V Human Body Model (A114-A)
ƒ Exceeds 1000-V Charged Device Model (C101C)
• Latch-Up Exceeds 250mA per JESD 78, Class II
• Range of Package Options SO-14 and TSSOP-14
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
1
3
2
4
5
6
7
1A
2A
1Y
2Y
3A
3Y
GND
13
14
12
11
10
9
8
6A
5A
6Y
5Y
4A
4Y
Vcc
( Top View )
SO-14 / TSSOP-14
Applications
• General Purpose Logic
• Wide array of products such as:
ƒ PCs, Networking, Notebooks, Netbooks
ƒ Computer Peripherals, Hard Drives, CD/DVD ROM
ƒ TV, DVD, DVR, Set Top Box
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet