Diodes 74AHC595 - Manual

74AHC595
Document number: DS35486 Rev. 3 - 2
1 of 10
www.diodes.com
June 2013
© Diodes Incorporated
74AHC595
8-BIT SHIFT REGISTER WITH 8-BIT OUTPUT REGISTER
Description
The 74AHC595 is an advanced high speed CMOS device.
An eight bit shift register accepts data from the serial input (DS) on
each positive transition of the shift register clock (STCP). When
asserted low the reset function (MR) sets all shift register values to
zero and is independent of all clocks.
Data from the input serial shift register is placed in the output register
with a rising pulse on the storages resister clock (SHCP). With the
output enable (OE
ሻ asserted low the 3-state outputs Q0-Q7 become
active and present.
All registers capture data on rising edge and change output on the
falling edge. If both clocks are connected together, the input shift
register is always one clock cycle ahead of the output register.
Features
 Wide Supply Voltage Range from 2.0 V to 5.5V
 Sinks or sources 8mA at V
CC
= 4.5V
 CMOS low power consumption
 Schmitt Trigger Action at All Inputs
 Inputs Accept up to 5.5V
 ESD Protection Tested per JESD 22

Exceeds 200-V Machine Model (A115-A)
 Exceeds 2000-V Human Body Model (A114-A)
 Exceeds 1000-V Charged Device Model (C101C)
 Latch-Up Exceeds 250mA per JESD 78, Class II

Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
Applications
 General Purpose Logic
 Serial to Parallel Data conversion
 Capture and hold data for extended periods of time
 Allow simple serial bit streams from a microcontroller to control as
many peripheral lines as needed
 Wide array of products such as:

Computer peripherals
 Appliances
 Industrial control
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet