Diodes FMMT717 - Manual (Page 2)

FMMT717
Document Number: DS33116 Rev. 5 - 2
2 of 7
www.diodes.com
October 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
FMMT717
Maximum Ratings
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Collector-Base Voltage V
CBO
-12 V
Collector-Emitter Voltage V
CEO
-12 V
Emitter-Base Voltage V
EBO
-7 V
Continuous Collector Current I
C
-2.5 A
Peak Pulse Current I
CM
-10 A
Base Current I
B
-500 mA
Thermal Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Power Dissipation (Note 6) P
D
625 mW
Power Dissipation (Note 7) P
D
806 mW
Thermal Resistance, Junction to Ambient (Note 6) R
θJA
200 °C/W
Thermal Resistance, Junction to Ambient (Note 7) R
θJA
155 °C/W
Thermal Resistance, Junction to Leads (Note 8) R
θJL
194 °C/W
Operating and Storage Temperature Range T
J,
T
STG
-55 to +150 °C
ESD Ratings
(Note 9)
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Human Body Model ESD HBM ≥ 8,000 V 3B
Electrostatic Discharge - Machine Model ESD MM ≥ 400 V C
Notes: 6. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured
when operating in a steady-state condition.
7. Same as note 6, except the device is measured at t ≤ 5 sec.
8. Thermal resistance from junction to solder-point (at the end of the collector lead).
9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.