Diodes DXT690BP5 - Manual (Page 2)

PowerDI is a registered trademark of Diodes Incorporated.
DXT690BP5
Document number: DS31801 Rev. 3 - 2
2 of 7
www.diodes.com
February 2014
© Diodes Incorporated
DXT690BP5
A Product Line of
Diodes Incorporated
Absolute Maximum Ratings
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Collector-Base Voltage V
CBO
60 V
Collector-Emitter Voltage V
CEO
45 V
Emitter-Base Voltage V
EBO
7 V
Continuous Collector Current I
C
3 A
Peak Pulse Current I
CM
6 A
Base Current I
B
0.5 A
Thermal Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Power Dissipation
(Note 6)
P
D
3.2
W (Note 7) 1.7
(Note 8) 0.74
Thermal Resistance, Junction to Ambient Air
(Note 6)
R
θJA
39
°C/W
(Note 7) 75
(Note 8) 169
Thermal Resistance, Junction to Leads (Note 9) R
θJL
9
Thermal Resistance, Junction to Case (Note 10) R
θJC
10
Operating and Storage Temperature Range T
J
, T
STG
-55 to +150 °C
ESD Ratings
(Note 11)
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A
Electrostatic Discharge - Machine Model ESD MM 400 V C
Notes: 6. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured
under still air conditions whilst operating in a steady-state.
7. Same as note (6), except mounted on 25mm x 25mm 1oz copper.
8. Same as note (6), except mounted on minimum recommended pad (MRP) layout.
9. Thermal resistance from junction to solder-point (on the exposed collector pad).
10. Thermal resistance from junction to the top of the case.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115.