Diodes DMN3024LK3 - Manual (Page 2)

DMN3024LK3
Document Revision: 1
2 of 8
www.diodes.com
June 2009
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DMN3024LK3
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Drain-Source voltage V DSS
30 V
Gate-Source voltage V
GS
±20 V
Continuous Drain current V
GS
= 10V
(Note 3)
I
D
14.4
A T
A
=70 °C (Note 3) 12.0
(Note 2) 9.78
Pulsed Drain current V
GS
= 10V (Note 4) I
DM
46.5 A
Continuous Source current (Body diode) (Note 3) I
S
12 A
Pulsed Source current (Body diode) (Note 4) I
SM
46.5 A
Thermal Characteristics
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Power dissipation
Linear derating factor
(Note 2)
P D
4.1
32.5
W
mW/
°C
(Note 3)
8.9
71.4
(Note 5)
2.17
17.4
Thermal Resistance, Junction to Ambient
(Note 2)
R θJA
30.8
°C/W
(Note 3) 14.0
(Note 5) 57.6
Thermal Resistance, Junction to Lead (Note 6) R θJL 2.24
Operating and storage temperature range T
J
, T
STG
-55 to 150 °C
Notes: 2. For a device surface mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
3. Same as note 2, except the device is measured at t
≤ 10 sec.
4. Same as note 2, except the device is pulsed with D = 0.02 and pulse width 300 µs. The pulse current is limited by the maximum junction temperature.
5. For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
6. Thermal resistance from junction to solder-point (at the end of the drain lead).