Diodes DMP4025LSS - Manual (Page 2)

DMP4025LSD
Document Number: DS35936 Rev: 1 - 2
2 of 8
www.diodes.com
June 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DMP4025LSS
ADVAN
CE I
N
F
O
RM
ATI
O
N Maximum Ratings
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Units
Drain-Source Voltage V
DSS
-40
V
Gate-Source Voltage V GSS
±20
Continuous Drain Current V
GS
= -10V
(Notes 6)
I
D
-8.0
A
T
A
= 70°C (Notes 6) -6.9
(Notes 5) -6.0
Pulsed Drain Current V
GS
= -10V (Notes 7) I
DM
-30
Continuous Source Current (Body diode) (Notes 7) I S
-8.0
Pulsed Source Current (Body diode) (Notes 7) I
SM
-30
Thermal Characteristics
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Power Dissipation
(Notes 5)
P
D
1.52
W
(Notes 6) 2.4
Thermal Resistance, Junction to Ambient
(Notes 5)
R θJA
82
°C/W (Notes 6) 52
Thermal Resistance, Junction to Lead (Notes 8) R θJL 48.85
Operating and Storage Temperature Range T
J,
T
STG
-55 to +150 °C
Notes: 5. For a device surface mounted on minimum recommended FR4 PCB with high coverage of single sided 1oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
6. Same as note (2), except the device is surface mounted on 25mm X 25mm X 1.6mm FR4 PCB.
7. Repetitive rating on 25mm X 25mm FR4 PCB, D=0.02, pulse width 300µs – pulse width by maximum junction temperature.
8. Thermal resistance from junction to solder-point (at the end of the drain lead).