Absolute maximum ratings, Maximum current, Thermal characteristics – Diodes ZXTR1005K4 User Manual
Page 2: Esd ratings, A product line of diodes incorporated
ZXTR1005K4
Datasheet number: DS36315
Rev. 1– 2
2 of 8
January 2014
© Diodes Incorporated
ZXTR1005K4
A Product Line of
Diodes Incorporated
Absolute Maximum Ratings
(Voltage relative to GND, @T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol
Value
Unit
Input Voltage
V
IN
-0.3 to 100
V
Enable Current
I
EN
±1 mA
Continuous Input & Output Current
I
IN
, I
OUT
100 mA
Peak Pulsed Input & Output Current
I
IM
, I
OM
100 mA
Maximum Voltage applied to V
OUT
V
OUT(max)
10 V
Maximum Current
(@ V
IN
= 48V, T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol
Value
Unit
Continuous Output Current
(Note 7)
I
OUT
50 mA
Pulsed Output Current
(Note 8)
I
OM
100
mA
(Note 9)
100
Thermal Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol
Value
Unit
Power Dissipation
(Note 5)
P
D
2.3
W
(Note 6)
1.1
Thermal Resistance, Junction to Ambient
(Note 5)
R
θJA
44
°C/W
(Note 6)
90
Thermal Resistance, Junction to Lead
(Note 10)
R
θJL
8.39
Thermal Resistance, Junction to Case
(Note 10)
R
θJC
8.15
Maximum Operating Junction Temperature Range
T
J
-55 to +125
°C
Storage Temperature Range
T
STG
-65 to +150
°C
ESD Ratings
(Note 11)
Characteristics Symbols
Value
Unit
JEDEC
Class
Electrostatic Discharge – Human Body Model
ESD HBM
4,000
V
3A
Electrostatic Discharge – Machine Model
ESD MM
400
V
C
Notes:
5. For a device mounted with the exposed V
IN
pad on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is
measured under still air conditions whilst operating in steady-state.
6. Same as note 5, except mounted on 15mm x 15mm 1oz copper.
7. Same as note 5, whilst operating at V
IN
=48V this is thermally limited. Refer to Safe Operating Area for other Input Voltages.
8. Same as note 5, except measured with a single pulse width = 100µs and V
IN
=48V. This is limited by the absolute maximum I
OM
rating.
9. Same as note 5, except measured with a single pulse width = 10ms and V
IN
=48V. This is limited by the absolute maximum I
OM
rating.
10. R
ΘJL
= Thermal resistance from junction to solder-point (on the exposed V
IN
pad).
R
ΘJC
= Thermal resistance from junction to the top of case.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115
.