Diodes ZXTR2008P5 - Manual (Page 2)

POWERDI is a registered trademark of Diodes Incorporated.
ZXTR2008P5
Document number: DS36333 Rev. 1 – 2
2 of 7
www.diodes.com
February 2014
© Diodes Incorporated
ZXTR2008P5
A Product Line of
Diodes Incorporated
Absolute Maximum Ratings
(Voltage relative to GND, @T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Input Supply Voltage V
IN
-0.3 to 100 V
Continuous Input & Output Current I
IN,
I
OUT
450 mA
Peak Pulsed Input & Output Current I
IM,
I
OM
2 A
Maximum Voltage applied to V
OUT
V
OUT(max)
14.5 V
Maximum Current at V
IN
= 48V
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Continuous Output Current (Note 7) I
OUT
45 mA
Pulsed Output Current
(Note 8)
I
OM
800
mA
(Note 9) 160
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation
(Note 5)
P
D
1.82
W
(Note 6) 0.94
Thermal Resistance, Junction to Ambient
(Note 5)
R
θJA
55
°C/W 
(Note 6) 107
Thermal Resistance, Junction to Lead (Note 10) R
θJL
20
Thermal Resistance, Junction to Case (Note 10) R
θJC
17.8
Recommended Operating Junction Temperature Range T
J
-40 to +125
°C
Maximum Operating Junction and Storage Temperature Range T
J
, T
STG
-65 to +150
ESD Ratings
(Note 11)
Characteristics Symbols Value Unit JEDEC Class
Electrostatic Discharge – Human Body Model ESD HBM 4000 V 3A
Electrostatic Discharge – Machine Model ESD MM 400 V C
Notes: 5. For a device mounted with the exposed V
IN
pad on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still
air conditions whilst operating in steady-state.
6. Same as Note 5, except mounted on 15mm x 15mm 1oz copper.
7. Same as Note 5, while operating at V
IN
= 48V. Refer to Safe Operating Area for other Input Voltages.
8. Same as Note 5, except measured with a single pulse width = 100µs and V
IN
= 48V.
9. Same as Note 5, except measured with a single pulse width = 10ms and V
IN
= 48V.
10. R
θJL
= Thermal resistance from junction to solder-point (on the exposed V
IN
pad).
R
θJC
= Thermal resistance from junction to the top of case.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115 .