Diodes PAM2310 - Manual (Page 2)

PAM2310
Document number: DSxxxxx Rev. 1 - 0
2 of 11
www.diodes.com
September 2012
© Diodes Incorporated
PAM2310
A Product Line of
Diodes Incorporated
Pin Descriptions
Pin
Name
Package Name Function
NC 1 No Connected
VIN 2 Bias supply. Chip main power supply pin
SW 3 The drains of the internalmain and synchronous power MOSFET.
GND 4 GND
FB 5 Feedback voltage to internal error amplifier, the threshold voltage is 0.6V.
NC 6 No Connected
EN 7
Enable control input. Force this pin voltage above 1.5V, enables the chip,
and below 0.3V shuts down the device.
NC 8 No Connected
Functional Block Diagram
Absolute Maximum Ratings (@T
A
= +25°C, unless otherwise specified.)
These are stress ratings only and functional operation is not implied. Exposure to absolute maximum ratings for prolonged time periods may
affect device reliability. All voltages are with respect to ground.
Parameter Rating Unit
Input Voltage V
IN
6 V
SW Pin Voltage -0.3 to (V
IN
+0.3) V
FB Pin Voltage -0.3 to (V
IN
+0.3) V
EN Pin Voltage -0.3 to 6.0 V
Maximum Junction Temperature 150 °C
Storage Temperature Range -65 to 150 °C
Soldering Temperature 300, 5sec °C