AEG KAM300 - Manual (Page 31)

17. When reached the pre-set time, the
machine will start brewing coffee and
the keep warm function.
16. After finishing program setup,
short press Program button
to activate the Auto function.
When activated, other buttons will
not response if pressed. If once pre-
programmed, the start time, number
of cups and coffee strength are not
to be changed. Press the Program
button to activate the Auto function.
18. If the appliance is pre-programmed
using the Auto function, but the
coffee is requested before the start
time. Switch off the Auto function by
pressing the Program button.
Note - When preparing coffee with
beans: Coffee preparation takes place
with the settings in normal mode.
When the settings differ from the
Auto function, it is needed to change
the settings accordingly in the normal
mode prior to the start.
20. Switching off. Press the ON/OFF
button.
Warming plate. After brewing, the
warming plate keeps the coffee in
the glass jug warm. Two hours after
brewing, the appliance will go into
standby mode automatically.
Removing the jug. When the jug is
removed, the anti-drip valve prevents
dripping.
19. Deactivating the Auto function.
If the Auto function is activated but
the program is not intended to start,
press the Program button.
GB
D
GR
NL
F
GB
31