Touch control panel – Hotpoint Ariston Aqualtis AQLF9D 692 U (EU)-A User Manual

Page 5

Advertising
background image

EN

5

WASH CYCLE

SELECTOR

knob

Button with

ON/OFF

indicator light

Touch control panel

TEMPERATURE

button

OPTION

buttons

DISPLAY

ECO

indicator light

START/PAUSE

button

with indicator light

DOOR LOCKED

indicator light

WASH
CYCLE
PHASE

icons

SPIN SPEED

button

DELAY

TIMER

button

CHILD LOCK

button

with indicator light

Button with ON/OFF indicator light: press this briefly to switch
the machine on or off. The green indicator light indicates that the
machine is switched on. To switch off the washing machine during
the wash cycle, press and hold the button for approximately
3 seconds; if the button is pressed briefly or accidentally the
machine will not switch off. If the machine is switched off during
a wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR knob: may be turned in either
direction. To select the most suitable wash cycle, please refer
to the “Table of wash cycles”.
The knob will not move during the wash cycle.

TEMPERATURE

button: press to modify or exclude the

temperature setting; the value selected will appear on the display
above (see “Running a wash cycle”).

SPIN SPEED CYCLE

button: press to modify or exclude the

spin cycle; the value selected will appear on the display above
(see “Running a wash cycle”).

DELAY TIMER

button: press to set a delayed start for the

selected wash cycle; the set delay time will appear on the display
above (see “Running a wash cycle”).

OPTION buttons with indicator lights: press to select the available
options. The indicator light corresponding to the selected option
will remain lit (see “Running a wash cycle”).

DETERGENT and

SOFTENER buttons : refer to

“Modifying pre-set parameters” in the chapter “Auto Dose System”.

DETERGENT DILUTION button: refer to “Filling the tanks

in the chapter “Auto Dose System”.
WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash

– Rinse

– Spin

Drain

). The text

lights up when the cycle is complete.

START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the button
again; the indicator light will flash in an orange colour.

If the “Door locked”

indicator light is switched off, the door

may be opened. To start the wash cycle from the point at which
it was interrupted, press the button again.

DOOR LOCKED

indicator light: indicates that the porthole

door is locked. To open the door, pause the wash cycle (see
Running a wash cycle”).

CHILD LOCK

button with indicator light: to activate or

deactivate the control panel lock, press and hold the button for
approximately 2 seconds. when the indicator light is illuminated,
the control panel is locked. This means it is possible to prevent
wash cycles from being modified accidentally, especially where
there are children in the home.

ECO indicator light: the

icon lights up when, after altering the

washing parameters, an energy saving of at least 10% is made.
Furthermore, before the machine enters “Standby” mode, the
icon will light up for a few seconds; when the machine is switched
off the estimated energy saving will be around the 80% mark.

CHANGE LANGUAGE
The first time the machine is switched on, the first language will
flash on the display. The “ “, “OK” and “V” symbols will appear
on the display, in line with the 3 buttons on the right-hand side.
The languages change automatically every 3”; alternatively, they
can be changed by pressing the buttons next to the “ “ and “V”
symbols. Use the “OK” button to confirm the language, which will
be set after 2”. If no buttons are pressed, the automatic language
change will begin again after 30”.
The language may only be changed while the machine is
switched off. Press and hold the temperature

+spin

+delayed start

buttons for 5’’; a short beep sounds and

the set language flashes on the display. Press the buttons
next to the “ “ and “V” symbols to change the language.
Use the button next to the “OK” symbol to confirm the
language, which will be set after 2”. If no buttons are pressed,
the language set previously will be displayed after 30”.
Switch on the machine.

DETERGENT

button

SOFTENER

button

DETERGENT

DILUTION

button

5

Advertising