2 setting up your computer, Arranging a comfortable work area, Connecting peripherals – Acer Aspire L3600 User Manual

Page 9: Positioning your pc, Connecting a monitor, Connecting the power cable

Advertising
background image

2

2 Setting up your computer

Arranging a comfortable work area

Positioning your PC

Take note of the following when selecting a location for your computer:

Do not put your computer near any equipment that might cause electromagnetic or radio

frequency interference, such as radio transmitters, televisions, copy machines or heating

and air-conditioning equipment.

Avoid dusty areas and extremes of temperature and humidity.

You may place your computer beside your desk or under your table, as long as it does not

block the space you need for working and moving.

Warning: Do not cover the top mesh to prevent overheating.

Your computer comes with a stand that can be easily installed or removed with a coin.

Use the stand if you want to place your computer vertically.

CAUTION: Please use the foot stand when placing your PC in the upright
position.

To place your PC in a vertical position(for selected models) :
a

Rotate the plastic stabilizers on the side of your computer.

b

Ensure the plastic stabilizers are extended completely.

Connecting peripherals

Setting up your computer is easy. For the most part, you only have four things to connect: the

mouse, the keyboard, the monitor, and the power cable.

Note: The peripherals shown in the connections below are

for your reference only. Actual device models may vary in

select countries.

Connecting your mouse and keyboard

(for selected models)

Plug your USB mouse or keyboard cable into any of the USB ports

located on the front

and rear panels of your computer.

Connecting a monitor

To connect a monitor, simply plug the monitor cable into the monitor port

(blue port) or

DVI port located on the rear panel of your computer .

Note: Refer to the monitor manual for additional instructions

and information.

Connecting the power cable

Make sure that the AC adapter is properly plugged into the computer and to the power

outlet.

Caution: Before you proceed, check the voltage range in your area. Make sure
that it matches your computer's voltage setting.

Advertising
This manual is related to the following products: