Direct platform control (dpc) console, Dpc console modes of operation – Acer Altos R700 User Manual

Page 66

Advertising
background image

4 Configuration Software and Utilities

56

Direct Platform Control (DPC) Console

Direct Platform Control (DPC) Console is part of Acer Advance Server
Management. Direct Platform Control is a server management
application that supports remote system management via LAN, or an
RS-232 serial connection to the server serial 2 port over a modem or a
direct serial cable. The Direct Platform Control Console provides the
ability for remote management of Acer servers via modem or LAN with
a capability to run DOS-based programs.

DPC console runs on a client workstation. It communicates with a
server by:

•

Accessing the server management capabilities of the on-board NIC

•

A Windows 2000 compatible modem.

•

An RS-232 connection to the server’s serial 2 port.

DPC Console is independent of the server operating system.

Even when the server is off, you can use DPC Console to verify the state
of a server or diagnose a problem with the server hardware. DPC
console features allows you to:

•

Establish connection to remote servers

•

Server Control: power on, power off, and reset operations

•

Retrieve and display entries in the System Event Log (SEL)

•

Retrieve and display Sensor Data Records (SDR)

•

Retrieve and display Field Replaceable Unit (FRU) information

•

Retrieve and display current Remote Sensor Access (RSA)
information

•

Access a phone book for remote connection management

•

Remote control of the service partition

•

File transfer from / to the server

DPC Console Modes of Operation

There are four DPC console modes of operation:

•

EMP mode. Access the DPC console features using the DPC console
window menus and/or toolbar. Active when a connection is
established through the EMP port.

AR700SB-e.book Page 56 Monday, September 30, 2002 9:09 AM

Advertising