Single processor configuration – Acer AT350 F1 User Manual
Page 66
3 System upgrades
54
•
It is recommended to install the DIMM modules in the following
sequence:
For single processor
•
Populate slot 1A first, followed by slots 2A, 3A,1B, 2B, 3B, 1C,
2C and 3C.
•
The memory slots for processor 2 are not available.
For dual processors
•
Populate DIMM slots 1A of each CPU first, followed by slots
2A, 3A,1B, 2B, 3B, 1C, 2C and 3C.
•
If mixing different DIMMs in one channel, the DIMM with higher
rank and density should be populated from slot A.
Memory population for independent mode
Single processor configuration
Notes: 1. Place DIMMs in “X” location.
2. DIMM population must correspond to the above tables.
3. DIMM modules support 1 GB, 2 GB and 4 GB DIMMs.
4. DIMM modules support 8 GB and 16 GB DIMMs (support
depends on availability).
5. Do not mix UDIMMs with RDIMMs.
6. Use single rank and dual rank RDIMMs only for
Configuration F.
Channel 1
DIMM slots
Channel 2
DIMM slots
Channel 3
DIMM slots
Notes
Configuration
1C
1B
1A
2C
2B
2A
3C
3B
3A
A
X
B
X
X
C
X
X
X
D
X
X
X
X
E
X
X
X
X
X
X
F
X
X
X
X
X
X
X
X
X
SR, DR RDIMMs
only