Pci/pnp configuration – Acer AT350 F1 User Manual

Page 95

Advertising
background image

83

PCI/PnP Configuration

Emulation Type

If set to Auto, USB devices that are
smaller than 530MB will be emulated
as floppy and the remaining will be
emulated as an HDD. The Forced FDD
option will allow you to confi gure an
HDD formatted drive to boot as an
FDD (eg. Zip Drive).

Auto
Floppy
Forced FDD
Hard Disk
CD ROM

Parameter

Description

Options

Plug & Play OS

Select Yes to allow the OS to
configure Plug & Play devices. (This is
not required for system boot if your
OS supports Plug & Play.) Select No to
allow the AMI BIOS to confi gure all
devices in the system.

Yes
No

SR-IOV
Supported

Select Enabled to enable Single-Root
I/O Virtualization (SR-IOV) support,
which works in conjunction with the
Intel Virtualization Technology to
allow multiple operating systems to
run simultaneously within a single
computer via natively shared PCI-
Express devices in order to enhance
network connectivity and
performance.

Enabled
Disabled

PCI-U Slot0
Option ROM/
PCI-E Slot2
Option
ROM~PCI-E Slot6
Option ROM

Select Enabled to enable Option ROM
support for the user to boot
computer using a network interface
from the slots specified above.

Enabled
Disabled

Load Onboard
LAN1 Option
ROM/Load
Onboard LAN2
Option ROM

Select Enabled to enable the onboard
LAN1 or LAN2 Option ROM. This is to
boot the computer using a network
interface.

Enabled
Disabled

Parameter

Description

Options

Advertising