Xylem 9100 Series Base Mounted Centrifugal Fire Pumps AC8585 REV.C - Manual (Page 3)

SEAL OPERATING LIMITS
DESCRIPTION
The 9100 Series Centrifugal Fire Pumps are frame
mounted pumps which feature – high efficiency,
rugged construction, compact design, foot
mounted volute and regreasable bearings. These
features, along with the horizontal split case, make
installation, operation and service easy to perform. PACKING
PH Limitations 7-9; Temperature Range 0 to
+200°F
For use on open or closed systems which require
a large amount of makeup water, as well as
systems which are subjected to widely varying
chemical conditions and solids buildup.
OPERATIONAL LIMITS
Unless special provisions have been made for
your pump by AC Fire Pump Systems, the
operational limits for 9100 Series Centrifugal Fire
Pumps are as follows:
PUMP IDENTIFICATION
Permanent records for this pump are referenced
by the Serial Number and it must, therefore, be
used with all correspondence to order all spare
and replacement parts. The fourth digit indicates
the specific pump on orders for more than one
pump. For example, if an order called for six
pumps, all pumps would have the same first three
sets of digits and the last digit will change to
identify each of the six. (e.g. 03-123456-01-01, 03-
123456-01-02, etc.)
MAXIMUM WORKING PRESSURE
Listed on pump nameplate.
FIGURE 1 – RATING PLATE
3