Bell & Gossett DN0177 B Domestic Pump Centrifugal Pumps Series C35 - Manual (Page 22)

2
3
4
5 6
7
1
1. Motor
2. Water slinger
3. Mechanical seal
4. Motor bracket
5. Impeller
6. Volute
7. Wear ring
Figure 4: Series C35
1. Place the impeller on the shaft.
2. Reinstall the stainless steel washer and secure the impeller with the capscrew or cap
nut.
3. Place a new gasket on the pump volute.
4. Reassemble the motor and pump subassembly on the pump volute.
Maintenance
20 Domestic ® Pumps Centrifugal Pumps Series B35, C17, C35 Installation, Operation, and Maintenance Manual