Xylem AC5659A G&L Pumps Series A-C 8100 Base Mounted Centrifugal Pumps - Manual (Page 2)

2
MODEL
NO.
SERIAL
NO.
IDENT.
NO.
G.P.M. FT. HP R.P.M.
P.S.I.
MAX.
WORK
PRESS.
1500 60 1780
PUMP
SERIES
DUTY
POINT
MAXIMUM
WORKING PRESSURE
PUMP
SIZE
SERIAL
NUMBER
MONTH
AND YEAR
DRIVER
HP-60
IMPELLER DIAMETER
14.8"
LEFT HAND
ROTATION
OPERATIONAL LIMITS
Unless special provisions have been made for your pump by
are as follows:
Maximum Working Pressure,
Listed on pump nameplate.
SEAL OPERATING LIMITS
Standard Self Flushing Mechanical Seals
BUNA-PH Limitations 7-9; Temperature Range -20 to +225°F
EPT-PH Limitations 7-11; Temperature Range -20 to +250°F
For use on closed or open systems which are relatively free of
dirt and/or other abrasive particles.
PUMP IDENTIFICATION
Series A-C 8100. The pump nameplate gives identification
and rating information as identified in Illustration 1.
Permanent records for this pump are kept by the serial number
and it must be used therefore with all correspondence and
spare parts orders.
Illustration 1 – The Rating Plate
DESCRIPTION
The A-C 8100 Series centrifugal pumps are frame mounted
pumps which feature – high efficiency, rugged construction,
compact design, foot mounted volute, center drop out coupler,
and regreasable bearings. These features, along with the
horizontal split case, make installation, operation, and service
easy to perform.
PUMP APPLICATION
The standard A-C 8100 Series centrifugal pump’s bronze
fitted construction make it ideal for service with the
feed water, condensate, hydronic cooling or heating, pressure
boosting, general pumping and benign liquids.
For other applications contact your local G&L Pumps
following liquids: unheated domestic and fresh water, boiler
G&L Pumps, the operational limits for A-C 8100 Series Pumps
G&L Pumps are designated by a series of numbers such as
G&L PUMP
G&L PUMPS
representative.
A-C8100 14.8 LHR
1-21937-1-1
8 x 8 x 17M
200
CWP-11
262