Xylem II 231 P INSIDER - Manual (Page 5)

5
4/07
PENTEK™ CONTROL BOX
CONNECTIONS
1. Remove the cover from the front of the 3-wire Pentek™ control box.
2. Remove the yellow wire from the terminal strip at L2.
3. Cut and remove the black wire connecting L1 and B (MAIN).
4. Press the PumpSaver
®
onto the L1 and L2 terminals.
5. Reconnect the yellow wire to L2 on the PumpSaver
®
.
6. Connect the blue wire attached to the PumpSaver
®
to the dual-lug terminal with the black wire
at the top of the capacitor.
Figure 3: Pentek™ Control Box without the Model 231-P-Insider Installed