Xylem IM254R01 e-HM Series - Manual (Page 3)

1 Introduction and Safety
1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide necessary information for:
• Installation
• Operation
• Maintenance
CAUTION:
Read this manual carefully before installing and using the
product. Improper use of the product can cause personal in-
jury and damage to property, and may void the warranty.
NOTICE:
Save this manual for future reference, and keep it readily available at
the location of the unit.
1.2 Inexperienced users
WARNING:
This product is intended to be operated by qualified person-
nel only.
Be aware of the following precautions:
• Persons with diminished capacities should not operate the prod-
uct unless they are supervised or have been properly trained by a
professional.
• Children must be supervised to ensure that they do not play on or
around the product.
1.3 Safety terminology and symbols
Hazard levels
Hazard level Indication
DANGER:
A hazardous situation which, if not
avoided, will result in death or se-
rious injury
WARNING:
A hazardous situation which, if not
avoided, could result in death or
serious injury
CAUTION:
A hazardous situation which, if not
avoided, could result in minor or
moderate injury
NOTICE:
• A potential situation which, if
not avoided, could result in
undesirable conditions
• A practice not related to per-
sonal injury
Hazard categories
Hazard categories can either fall under hazard levels or let specific sym-
bols replace the ordinary hazard level symbols.
Electrical hazards are indicated by the following specific symbol:
Electrical Hazard:
Hot surface hazard
Hot surface hazards are indicated by a specific symbol that replaces the
typical hazard level symbols:
CAUTION:
Description of user and installer symbols
Specific information for personnel in charge of installing
the product in the system (plumbing and/or electrical
aspects) or in charge of maintenance.
Specific information for users of the product.
1.4 Warranty
For information about warranty, see the sales contract.
1.5 Spare parts
WARNING:
Only use original spare parts to replace any worn or faulty
components. The use of unsuitable spare parts may cause
malfunctions, damage, and injuries as well as void the guar-
antee.
For more information about the product's spare parts, refer to the Sales
and Service department.
1.6 Declaration of Conformity
We at,
Xylem Inc./Goulds Water Technology
1 Goulds Drive
Auburn, NY 13021
Declare that the following products: NPE, MCS, MCC, 3642/3752,
3656, 3656 SP, GB, e-SV, SVI, NPO, Prime Line SP, HB, e-HM, HMS, LC,
NPV, LB, LBS comply with Machine Directive 06/42/EC. This equipment
is intended to be incorporated with machinery covered by this direc-
tive, but must not be put into service until the machinery into which it is
to be incorporated has been declared in conformity with the actual
provisions of the directive.
Nick Daddabbo
Industrial Product Engineer
2 Transportation and Storage
2.1 Inspect the delivery
1. Check the outside of the package.
2. Notify our distributor within eight days of the delivery date, if the
product bears visible signs of damage.
3. Remove the staples and open the carton.
4. Remove the securing screws or the straps from the wooden base
(if any).
5. Remove packing materials from the product. Dispose of all pack-
ing materials in accordance with local regulations.
6. Inspect the product to determine if any parts have been damaged
or are missing.
7. Contact the seller if anything is out of order.
1 Introduction and Safety
2 Model e-HM Installation, Operation, and Maintenance Manual