Xylem HandyLab 200 QuickStart - Manual (Page 5)

HandyLab 200 English
3 ba77038y01 04/2014
EN
Initial
commissioning
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD.
1 Status information
2 Measured value (with unit)
3 Measured parameter
4 Sensor symbol
(calibration evaluation)
5 Measured temperature (with unit)
6 Further status information
7 Softkeys and date/time
HOLD AR
25.0
1417
°C
3
2
4
5
6
7
1
μS/cm
[Tr25][nLF][ 0.835 1/cm]
Menu
ϰ
15.02.2014
08:00
Display
1 Conductivity measuring cell
Digital sensors
()
2 USB B interface (device)
3 Service interface
2 1
Jack field /connections
1 Insert the supplied batteries.
Make sure that the poles are in the correct position.
2 Switch on the meter with the <On/Off> key.