Xylem MultiLab 4010-2 User Manual
Xylem Tools
Advertising
Table of contents
Document Outline
- 1 Overview
- 2 Safety
- 3 Commissioning
- 4 Operation
- 5 pH value
- 5.1 Measuring
- 5.2 pH calibration
- 5.2.1 Why calibrate?
- 5.2.2 When do you have to calibrate?
- 5.2.3 Carrying out automatic calibration (AutoCal)
- 5.2.4 Carrying out a manual calibration (ConCal)
- 5.2.5 Calibration points
- 5.2.6 Calibration data
- 5.2.7 Continuous measurement control (CMC function)
- 5.2.8 QSC function (sensor quality control)
- 6 ORP voltage
- 7 Dissolved oxygen (D.O.)
- 8 Conductivity
- 9 Settings
- 10 Data storage
- 11 Transmitting data
- 11.1 Outputting current measurement data
- 11.2 Transmitting data
- 11.3 Connecting the PC / USB-B interface (USB Device)
- 11.4 Connecting a USB memory device/USB printer (USB-A interface (USB Host))
- 11.5 Options for data transmission to the USB-B (PC) interface and the USB-A (USB printer) interface
- 11.6 Data transmission to the USB-A interface (USB memory device)
- 11.7 MultiLab Importer
- 11.8 BOD Analyst Pro
- 12 Maintenance, cleaning, disposal
- 13 What to do if...
- 14 Technical data
- 15 Firmware update
- 16 Glossary
- 17 Index
- 18 Appendix
- 19 Contact Information