Xylem MultiLab 4010-2 - Manual (Page 75)

MultiLab 4010-2 Settings
ba76142e01 05/2013 75
9.6.2 Resetting the system settings
The following system settings can be reset to the default condition:
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the <ENTER
_
> key in the
measured value display.
Setting Default settings
Language English
Audio signal on
Baud rate 4800 Baud
Output format ASCII
Decimal separator Dot (xx.x)
Brightness 10
Temperature unit °C
Stability control on