Xylem MultiLab 4010-2 - Manual (Page 69)

MultiLab 4010-2 Settings
ba76142e01 05/2013 69
Temp. comp. (TC) /
Method nLF
lin
off Procedure for temperature compen-
sation (see section 8.2 T
EMPERATURE
COMPENSATION , page 57).
This setting is only available for the
measured parameters,
ϰ and ρ.
Temp. comp. (TC) /
Linear coeff. 0.000 ...
2.000 ...
3.000 %/K Coefficient of the linear temperature
compensation.
This menu item is only available when
the linear temperature compensation
is set.
Temp. comp. (TC) /
Reference temp. 20 °C
25 °C Reference temperature
This setting is only available for the
measured parameters,
ϰ and ρ.
Multiplier for TDS 0.40 ... 1.00 Factor for TDS value
Reset - Resets all sensor settings to the deliv-
ery condition (see section 9.6.1
R
ESETTING THE MEASUREMENT SET
-
TINGS , page 73).
Menu item Possible
setting Explanation