Xylem HandyLab 600 QuickStart - Manual (Page 5)

HandyLab 600 English
3 ba77039y01 04/2014
EN
Initial
commissioning
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD.
1 Status information
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control
(CMC function)
5 Sensor symbol
(calibration evaluation)
6 Measured temperature (with unit)
7 Further status information
8 Softkeys and date/time
HOLD AR
pH
4 3
2
5
6
7
8
1
0 14
7.007
25.0 °C
Menu
15.02.2014
08:00
Display
1 Digital sensors
(pH)
2 USB B interface (device)
3 Service interface
3 1 2
Jack field /connections
1 Insert the supplied batteries.
Make sure that the poles are in the correct position.
2 Switch on the meter with the <On/Off> key.