Xylem HandyLab 680 QuickStart - Manual (Page 5)

HandyLab 680 English
3 ba77040y01 04/2014
EN
Initial
commissioning
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD.
1 Status information
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control
(CMC function)
5 Sensor symbol
(calibration evaluation)
6 Measured temperature (with unit)
7 Softkeys and date/time
4 3
2
5
6
7
1
15.02.2014 08:00
Display (example: pH measurement)
1 Digital sensors
(pH, conductivity, D.O.)
2 USB B interface (device)
3 USB A interface (host)
4 Connection for line adaptor
5 Service interface
5 1 5 1 4 3 2
Jack field /connections
1 Insert the supplied rechargeable batteries.
Make sure that the poles are in the correct position.
2 Connect the power pack if necessary.
The batteries are charged.
3 Switch on the meter with the <On/Off> key.