YSI Data Scout - Manual (Page 11)

3.1.3 SELECTING FROM MULTIPLE TRANSDUCERS
If Data Scout discovers multiple transducers via the Selective or Complete detection routines, you need to choose which Level Scout to
view and configure. Do this by clicking Transducer > Select. Check the transducer you wish to view live data from and configure
(Figure 3.5).
Figure 3.5
3.1.4 STOPPING (FORGET) TRANSDUCERS
Once you have opened Data Scout, you may occasionally wish to stop live data collection for that transducer: to preserve batteries, to
save memory space on a pocket PC, etc. By clicking Transducer > Stop (Figure 3.6), you can stop live collection and “un-discover”
the transducer. When you perform this operation, you will immediately return to the welcome screen (Figure 3.1). To rediscover the
same transducer, simply click Transducer > Start > Previous.
Figure 3.6
3.1.5 EXIT THE APPLICATIONS
When using the desktop version of Data Scout, you may exit using one of two methods. Either method executes the “Stop” function
described in Section 3.1.4, i.e. cancelling live data collection.
ƒ By clicking Transducer > Exit (Figure 3.7).
ƒ By clicking the red [X} at the top right corner of the application.
When using the mobile application, you must always exit by clicking Transducer>Exit. If you just click the [X] at the top right corner,
the application will only be ‘hidden’ from view and will still be running in the background.
YSI Incorporated Data Scout 11