2 mounting the shock protectors, Mounting the shock protectors -4 – YSI CarboVis 705 IQ TS User Manual
Page 14
Advertising
Commissioning
CarboVis 70x IQ TS
3 - 4
ba75950e02
11/2012
3.3.2 Mounting the shock protectors
The shock protectors consist of two rings, a cap and four cable ties. To
mount the shock protectors, proceed as follows:
Fig. 3-4 Mounting the shock protectors
1.
Plug the cap (pos. 2 in Fig. 3-4) on one of the two rings (pos. 1).
2.
Put the assembled unit on the sensor end and fix it with 2 cable
ties (pos. 3) as shown in Fig. 3-4.
3.
Put the second ring on the cable end of the sensor and fix it
with the remaining two cable ties in the same way.
1
3
2
Sensor with mounted
shock protectors
Advertising
This manual is related to the following products: