YSI IQ S ENSOR N ET NitraVis 70x IQ TS - Manual (Page 18)

Commissioning
NitraVis 70x IQ TS
3 - 8 ba75950e02 11/2012
3.4.2 Sensor structure
The physical sensor is the sensor with the instrument or model desig-
nation, NitraVis 70x IQ TS. The physical sensor processes the mea-
surement signal (absorbance spectrum) and supplies up to 5
measurement results to the IQ S
ENSOR
N
ET
. The measurement results
are administrated like 5 sensors that differ in hierarchy as follows:
Main sensor The sensor for nitrate measurement is the main sensor.
It registers on the system under the designation, NitraVis 70x IQ TS
and the series number of the physical sensor.
Secondary sensor The sensor for the measurement of total suspended solids is the
secondary sensor.
It registers on the system under the designation, SolidVis 70x IQ and
the series number of the physical sensor.
Sensor overlapping
settings and functions
Some settings and functions are sensor overlapping. Sensor overlap-
ping settings are generally edited in the setting menu of the main sen-
sor.
These are the most important sensor overlapping settings and func-
tions:

Measuring location
 Times of the measuring cycle (
Meas. interval , Cleaning duration , Adjustment phase etc.)

Signal smoothing
Details on sensor overlapping functions are given in the following
section.