2 application conditions, 2 application conditions -2 – YSI IQ S ENSOR N ET NitraVis 70x IQ TS User Manual
Page 48
Technical data
NitraVis 70x IQ TS
8 - 2
ba75950e02
11/2012
cantly influenced by the light scattering due to solids and the absorption
of accompanying substances (sample matrix). Therefore, no fixed
measuring range can be determined beforehand.
8.2
Application conditions
Suitability and areas of
application
Municipal wastewater with a low proportion of industrial wastewater
Measuring medium:
Pressure resistance
Sensor with connected SACIQ (SW) sensor connection cable:
The sensor meets all requirements according to article 3(3) of 97/23/
EC ("pressure equipment directive").
Type of protection
Sensor with connected SACIQ (SW) sensor connection cable:
IP X8, 1 bar (10
5
Pa)
Immersion depth
Operating position
Any
pH value
4 - 12
Flow rate
< 3 m/s
Temperature
0 °C ... + 45 °C
(32 °F ... + 113 °F)
Max. allowed overpressure
105 Pa (1 bar)
min
The measuring gap must be
filled with test sample.
max
10 m depth