YSI IQ SensorNet MIQ/IF232 Module - Manual (Page 6)

Overview MIQ/IF232
1 - 2 ba76037d01 01/2012
1.2 Features of the MIQ/IF232
General characteristics The MIQ/IF232 expands the IQ S ENSOR N ET by an RS232 interface.
This enables a connection between the IQ S ENSOR N ET and a PC.
With the aid of the IQ S ENSOR N ET software pack, the following
functions, for example, can be carried out on a PC:

(Remote) Operation and (remote) monitoring of the IQ S ENSOR N ET
via the MIQ/T2020 PC software terminal.
The software terminal has the same operating concept as other
terminal components (e.g. MIQ/T2020). This means that is hardly
necessary to "get used" to it when changing between the different
types of terminal.
 (Remote) Data transmission of current measured data
 (Remote) Data transmission of saved measured data
 Remote backing up/loading of the IQ S ENSOR N ET system
configuration
Note
Details for the operation of the software are given in the operating
manual of the IQ S
ENSOR N ET software pack.
With the standard MIQ module housing, the MIQ/IF232 has the same
characteristics as all MIQ modules regarding stability, leakproofness
and weather resistance. It also provides the same wide variety of
installation options (stacked mounting, canopy mounting, tophat rail
mounting, etc.).
Terminal strip The MIQ/IF232 has the following electrical connections on the terminal
strip inside the housing:
 1 x RS 232 connection, already wired up with cable and connector
 3 x SENSORNET connection