YSI IQ SensorNet MIQ/IF232 Module - Manual (Page 13)

MIQ/IF232 Technical data
5 - 1 ba76037d01 01/2012
5 Technical data
Note
General technical data on MIQ modules are given in the T
ECHNICAL
DATA chapter of the IQ S ENSOR N ET system operating manual.
Electrical data
Instrument safety
Number of MIQ/IF232 in
the IQ S ENSOR N ET
The MIQ/IF232 counts as a terminal component. A total of up to three
terminal components can be used in the IQ S
ENSOR N ET .
Terminal connections
RS 232 cable
Nominal voltage Max. 24 VDC
via the IQ S
ENSOR N ET (for more details, see
chapter T ECHNICAL DATA of the
IQ S ENSOR N ET system operating manual).
Power consumption Approx. 0.2 W
Protective class III
Applicable norms – EN 61010-1
– UL 3111-1
– CAN/CSA C22.2 No. 1010.1
IQ S ENSOR N ET
connections
3
Additional connectable SENSORNET
terminator (terminating resistor)
RS 232 GND RS 232, TxD, RxD
Terminal type Screw-type terminal strip, accessible by
opening the lid
Terminal ranges Solid wires:
Flexible wires:
0.2 ... 4.0 mm
2
AWG 24 ... 12
0.2 ... 2.5 mm
2
Cable feeds 4 cable glands M16 x 1.5 on the underside
of the module
Length 3 m
Connected with the MIQ/IF232 in the factory
Plug connection
to the PC D-sub, 9-pole