YSI IQ S ENSOR N ET MIQ/A - Manual (Page 9)

MIQ/A Installation
11 ba76057e01 01/2012
3 Installation
3.1 Scope of delivery
The following parts are included in the scope of delivery of the MIQ/A:
 MIQ/A.
 4 x screwed cable glands with seals and blind plugs
 2 x ISO blind nuts (M4)
 2 x cheese-head screws (M4x16) with plastic washer
 1 x contact base
 2 x plastic tapping screws for fixing the contact base
 Operating manual.
3.2 Installation in the IQ S ENSOR N ET
General installation
instructions
The IQ S ENSOR N ET provides a number of options for integrating the
MIQ/A mechanically and electrically in the system (stacked mounting,
distributed mounting, etc.). The individual types of installation are
described in detail in the I
NSTALLATION chapter of the system operating
manual.