Xylem F410 VARIABLE AREA FLOWMETERS - Manual

Maintenance
The “Exploded View” drawing illustrates assembly of the F-400N series meter. If
your flowmeter needs to be cleaned refer to this drawing when reassembling the
unit. The tapered tube may be cleaned with a soft bottle brush. Use a MILD soap
and water solution for cleaning purposes. Hard water deposits can be removed
with a 5% acetic acid solution (vinegar). Note the floats “up” position.
BLUE-WHITE INDUSTRIES LIMITED WARRANTY
FLOWMETERS are warranted to be free of defects in material and workmanship
for up to 12 months from the date of factory shipment. Warranty coverage is
limited to repair or replacement of the defective flowmeter only. Blue-White
Industries does not assume responsibility for any other damage that may occur.
This warranty does not cover damage to the flowmeter that results from misuse
or alterations, nor damage that occurs as a result of: meter misalignment,
improper installation, over tightening, use of non- recommended chemicals, use
of non-reccomended adhesives or pipe dopes, excessive heat or pressure, or
allowing the meter to support the weight of related piping. Flowmeters are tested
and calibrated with water and air only. Although meters may be suitable for other
chemicals, Blue-White cannot guarantee their suitability.
Flowmeters are repaired at the factory only. Call or write the factory to receive a
Return Authorization Number, carefully pack the flowmeter to be returned,
including a brief description of the problem. Note the RA number on the outside
of the carton.
1
2
3
4
5
6
3
2
1
Note: Shaded items (float and meterbody) are not sold separately
Parts List 3/4” and 1” FPT
Item
1
Catalog Description Amount
3/4” FPT Adapter PP
2
3
4
5
6 F-4010K
F-4009
-
F-4013PP
F-4004
-
2
O-ring, 127, Viton
Wire holder, .75 - 1.0 PP
Float
Guide Wire, .125 x 8.5 SS
2
2
1
1
Meterbody
1 F-4011 1” FPT Adapter PP 2
1
F-410
Amount
Parts List 1/4”, 3/8” and 1/2” FPT
1
1
1 F-4019
76000-707
76000-708
1/4” FPT Adapter PP 2
3/8” FPT Adapter PP 2
1/2” FPT Adapter PP 2
2
3 90003-119
F-4005
O-ring, 127, Viton
Wire holder, 1/4” PSF
2
2
Description Catalog Item
F-400
Exploded View and Parts List
Website: www.Blue-White.com
E-mail: [email protected] | [email protected]
Phone: 714-893-8529 | Fax: 714-894-0149
5300 Business Drive
Huntington Beach, CA 92649
Blue-White
Industries, Ltd.
R
B
A
Specifications
Meter Body: Acrylic, clear
Floats: #316 Stainless Steel or Hastelloy C-276
Adapters: Polypropylene with aluminum stress rings
O-Rings: Viton
Scale: Permanent Silkscreen
Max. Pressure: 150 PSIG / 10.3 BAR (see graph)
Max. Temperature: 150 °F / 65.6°C (see graph)
® Your Blue-White F-400 / F410 Series In-Line Flowmeter
® !Your Blue-White flowmeter was designed to be easy to install.
!Please read the Instruction Guideline on the next page before installing your
flowmeter.
!This flowmeter is an instrument, special care should be taken when handling
and installing.
Inspection of the Flowmeter and Compatibility
!Carefully inspect the meter for any damage that may have occurred during
shipping.
!Remove the plastic tubing that has been inserted during packaging for shipping
reasons.
!Make sure your pressure, temperature, fluid and other requirements are
compatible with the meter before installation.
!The maximum temperature capability decreases as the pressure increases.
The max PSI decreases as the temperature increases. See the chart on the
following page.
®
!Although the meter may be suitable for other chemicals, Blue-White meters
are tested with water and air only. If you are unsure of the meters compatibility
with your chemical, please consult the factory.
®
!Blue-White warranties the flowmeter for use with air and water only.
F-40250N
F-40375N
A
8-3/16” (208.0mm)
8-3/16” (208.0mm)
Model
F-40376N
F-40377N 8-3/16” (208.0mm)
8-3/16” (208.0mm)
F-40500N 8-3/16” (208.0mm)
B
1-1/4” (31.75mm)
1-1/4” (31.75mm)
1-1/4” (31.75mm)
1-1/4” (31.75mm)
1-1/4” (31.75mm)
F-40750N 11” (279.4mm)
F-41017N 11” (279.4mm)
1-3/4” (44.45mm)
1-3/4” (44.45mm)
F-41000N 11” (279.4mm) 1-3/4” (44.45mm)
In. (mm) In. (mm)
Installation Instructions
80000-362 09/25/2003
F-400 & F-410
Blue-White
Industries, Ltd.
R